Howdy guys,
I'm curious as to a general carb tuning starting point for everyone running the LO206 at GCKI. I've found the following guidelines online, and am curious if this holds pretty true for our typically higher humidity and low altitude:
Float height = .860 / .880 inch
Float drop = 1.050 inch
Idle air bleed screw = 1-2 turns out
C- clip needle setting = middle slot ( #3 slot )
LO206 Carb Tuning for GCKI
Moderators:Jay Kleinheinz, Paul Jones, Mark Chandler, Scott Boone, Matt Blehm
Who is online
Users browsing this forum: No registered users and 2 guests