Gearing Again!

80Jr and Sr, 125 Senior, Stock and Masters

Moderators:Jay Kleinheinz, Paul Jones, Mark Chandler, Scott Boone, Matt Blehm

Post Reply
David Herbeck
Posts:14
Joined:Mon Oct 19, 2009 4:40 pm
Gearing Again!

Post by David Herbeck » Sun Nov 22, 2009 6:42 pm

I had recieved a reply to this before but now I can't find it. What sprockets should I run at grandsport speedway 1.3 mile course?
Thanks
Dave
Top
Brad Johnson
The master poster
Posts:335
Joined:Wed Aug 08, 2007 1:59 pm
Location:Magnolia, Texas

Re: Gearing Again!

Post by Brad Johnson » Mon Nov 23, 2009 12:43 pm

Since my memory was foggy before, I'll reply again. I think 18/26 would be a good place to start. I can't remember from the times I've run there. That is with a stock CR125, not sure if it would change much with a mod CR. Probably very different with an ICC.
Top
David Herbeck
Posts:14
Joined:Mon Oct 19, 2009 4:40 pm

Re: Gearing Again!

Post by David Herbeck » Mon Nov 23, 2009 5:17 pm

Thanks Brad. Not sure what happened to my thread but thanks for the help.
Top
Post Reply

Return to “Shifter Kart Forum”

Who is online

Users browsing this forum: No registered users and 1 guest