Page 1 of 1

LO206 Carb Tuning for GCKI

Posted: Tue Oct 09, 2018 12:19 pm
by Ryan Van Winkle
Howdy guys,

I'm curious as to a general carb tuning starting point for everyone running the LO206 at GCKI. I've found the following guidelines online, and am curious if this holds pretty true for our typically higher humidity and low altitude:

Float height = .860 / .880 inch
Float drop = 1.050 inch
Idle air bleed screw = 1-2 turns out
C- clip needle setting = middle slot ( #3 slot )